 Powerline Interface Module
The PIM Powerline Interface Module is a small plug-in device designed to be the interface between an RS232 or USB port on a computer or dedicated controller and the powerline.
The PIM is the device of choice for interfacing PCS's UPStart Setup Software to the powerline.
New for Generation II
USB Interface
The new PIM-U provides an ultra-reliable interface between the USB port and the powerline.
Enhanced Noise Immunity –
Generation I devices sometimes would not communicate properly if there was a certain amount of noise on the powerline. Generation II now alleviates this type of situation.
Receive Sensitivity Adjustment
Now you can adjust the receive sensitivity in UPStart to improve communication in excessive powerline noise.
Cool Blue LED
The new status LED color gives your wall switches a modern “high-tech” look.
Operation
The PIM plugs into any standard 120VAC electrical outlet. The PIM-R is an RS-232 serial interface that connects to any available COM port via a DB9 serial cable (included). The PIM-U is a USB serial interface that connects to any available USB port. Software drivers allow the PIM-U to emulate a serial PIM by taking over an available COM port.
Transmits and Receives From the Powerline
The PIM is both a UPB transmitter and a UPB receiver giving the host the ability to perform true two-way powerline communication. It implements a simple serial (ASCII) message set that is fully documented on the PCS website.
UPStart Interface
The PIM is the device of choice for interfacing PCS's UPStart Setup Software to the powerline.
All PulseWorx devices, with the PIM, can be initially configured using PCS’s free UPStart Software setup tool. UPStart enables configuring such parameters as Network Name, Network ID, Unit ID, Room name, Device name, default on light levels, fade rates, LED colors, dimming disable, auto shut-off time, etc. As well as test the operation and communication strength of the device. UPStart has the option to configure an entire network off-line and then download the information into the devices after they are installed in the home.
Two Modes of Operation
Colors
The PIM comes in a White plastic enclosure.
A multi-color (Blue, Magenta, Red) LED is provided on the front of the module and acts as a powerline signal indicator as well as indicating modes of operation.
All PCS products are completely
“Made in USA” and carry a five-year limited warranty and a one-year Money Back Guarantee for Certified Dealers.
The PIM communicates in two different modes of operation, depending on the level of information required from the powerline. Message Mode informs the host when a valid UPB message is received on the powerline. Pulse Mode informs the Host of every UPB Pulse that is on the powerline.
Model
Powerline Interface - RS-232 Serial |
PIM-R |
Powerline Interface - USB |
PIM-U |
Visit our PulseWorx Downloads Center for User's Guides/Manuals and technical doumentation.
|
