Packaged Kits

PulseWorx solution packages provide you all of the right components to help you get started with lighting controls. PulseWorx systems are scalable which allows you to expand your system at any time. If you decide to add “one more” Dimmer, or remodel your home, adding components couldn’t be easier.

Retrofit Light Kit (RLK-4)

The RLK-4 furnishes you with all the devices to retrofit convenience and style into a room or area to control four zones of lighting from an easy to use six button Keypad. You will want to expand the system once you experience the richness added to your life.

The six pre-programmed scenes will allow homeowners to start enjoying their PulseWorx system sooner. Changing the existing scenes are as simple as activating the scene, changing the lighting levels at the wall switches and tapping the scene button on the keypad five times. Your kit includes:

• (3) WS1D-6-W
• (1) KPLD-6-W
• (1) PPC-1

3 Zone Keypad Lighting Kit - Model KPLK-3

This package is a perfect retrofit solution to add convenience and style by controlling 3 lights either individually or with the pre programmed scenes from two locations. The KPLD Keypad Controller with Load Control replaces an existing dimmer, like your front porch light; while the KPCD Desktop will give you control from the comfort of your bed or couch. Changing the basic characteristics of the Keypad and Wall Switches are done with a few presses of the desktop keypad buttons: including default on levels and scene characteristics. No computer required. Kit includes:

• (1) KPLD-6-W
• (1) KPCD-6-W
• (2) WS1D-6-W
  
  

Remote Car Kit - Model RCK-2

Now you can turn on lights as you pull into the driveway and never have to worry if the batteries are dead in the remote. The RFR4 Remote provides a hand-held method to control your PulseWorx lighting system over 50 feet away. The kinetic energy created by depressing the ON or OFF side of the remote generates enough energy to transmit. The RFI-E translates the RF codes into UPB signals on the powerline to control a single light, create a pathway or light up the whole house. Kit includes:

• (1) RFR4-B
• (1) RFI-E
• (2) WS1D-6-W

Starter Parts Kit (SPK-1)

The SPK-1 Starter Parts Kit is a great package which enables you to initially learn how to install and program a super simple PulseWorx system.  Your kit includes:

The UPStart Setup Software and PIM will let you fully customize and program the two main components of the system, the KPCW-6 and the WS1D-6. Learn how to wire a PulseWorx 3-Way circuit. Program or change the default scenes. The Starter Parts Kit will allow you to understand how a system goes together.

4 Zone Starter Kit (SPK-4)

The SPK-4 Starter Kit is a great package which enables you to initially set up your PulseWorx system by enabling you to control 4 lighting zones in main areas in your home. Your kit includes:

This 4-Zone package will soon be expanded once you experience the richness added to your life. The UPStart software and PIM will let you fully customize and program a variety of scenes and control 4 different lights from the keypads. Change the characteristics of Keypad and Wall Switches including fade rates, default on levels and scene characteristics.

6 Zone Lighting Kit (LIK-6)

The LIK-6 enables you to control 6 different lighting zones from 2 Wall Mounted Keypads. Your kit includes:

The keypads and wall switches are pre-programmed with six basic scenes. Spending less time on programming will allow you to start enjoying your PulseWorx system sooner. Changing the existing scenes are as  simple as activating the scene, changing the lighting levels at the wall switches and tapping the scene button on the keypad five times.  The Keypads can also receive IR commands to give you control from any learning remote.

Timer Lighting Kit (TLK-6)

The PulseWorx Timer Lighting Kit enables you to create dramatic lighting scenes programmed to turn on at sunset, a specific times each day, on specific days of the week, or on a specific day of the year.
Your kit includes:

A Security Mode is available to randomly vary the event time each day, giving your home a lived in look. The included Keypad will allow you local control of the six wall switches as well.  Programming the 20 timed events couldn’t be simpler using UPStart Setup Software. Your programming is all battery-backed-up for 10 years.

Security Interface Kit (SIK-4)

The PulseWorx Security Interface Kit enables any security or automation panel which transmits X-10 to communicate directly to UPB Devices. Your kit includes:

The PW513 Bridges the X-10 commands to UPB commands to control four Wall Switches.  Default mapped addressing codes can be modified using UPStart. Six default scenes are pre-programmed in to each wall switch.